中文 中文  Anmai English English  Anmai Español Español  Anmai Русский Русский  Anmai العربية العربية

Jet Grouting Drilling Bit


Description:

Jet grouting bit (jet grouting drilling bit) is the main component of drilling and gunite work. It is mounted on the very bottom ends. The top of this drilling bit is inlaid with hard alloy so as to drill. And there are two jet nozzles on both sides of the barrel, with diameter from 1.6 mm to 30 mm. And the jet grouting bit can be subdivided into single, duplex and trebling drilling bit. The duplex jet grouting drilling bit is equipped with annular gas nozzle so as to guarantee the coaxial jet of the thick liquid and gas. Three single jet nozzles are mounted on the body of jet grouting bit so as to spray high pressure water.

Working Process
When the workers dig holes, the jet grouting bit or jet grouting drilling bit will rotate with the axle and make axial movement at the same time. The soil is cutting through torsion and axial force. And under the extrusion of the blade and centrifugal force, the soil is raveled. And this can form soil flowing pressure to the pit wall. And meanwhile the soil can be delivered up to the surface of the earth. When no pit wall can stop the soil flowing movement, the hack will be thrown to the surrounding of the pit. This is the whole working process of digging hole.

Parameters of Jet Grouting Bit



Main Technique Specifications:

Name

Code Unit Weight

Remark

50 Single Drilling Bit

G7150 Piece 4.8 kg  

60 Duplex Drill

G7260 Piece 5.6 kg

73 Duplex Drill Bit

G7273 Piece 7.2 kg

73 Triple Drilling Bit

G7373 Piece 16.6 kg

89 Triple Drill

G7389 Piece 20.5 kg

89 Double High Pressure Trebling Drilling bit

G7389G Piece 23 kg

Maintenance of Jet Grouting Drilling Bit
1. When drilling steel pieces, please ensure sufficient amount of cooling. And metal machining liquid should be utilized.
2. Good jet grouting bit rigidity and guide rail interval can improve the precision of the hole and prolong long service life of the drilling bit
3. Please make sure that the magnetic holder and work pieces are smooth and clean.
4. When drilling sheet metals, the work pieces should be reinforced. When drilling large work pieces, please guarantee the stability of work pieces.
5. The feeding amount should be reduced by one third at the beginning and the end of the drilling work.
6. If large amount of powder appears, like cast iron and cast copper, etc. The compact air can be used to drain the powder without using cooling liquid.
7. Please remove the scrap iron binding around the drill body so as to guarantee the powder can be drained.

With high technology, great production capacity and strong innovation ability, we provide high quality and guaranteed drilling tools like jet grouting bits, pad forks and locking device and more. For detailed information about our jet grouting drilling bits, please visit our website and contact us directly.

Related Product

Drilling Rod

Drilling rods are kind of jet grouting drilling tools. They are used to deliver serous fluid, compress air and water and so on. The drill rods adopt pipe fittings from Shanghai Baoshan Iron and Steel Plant with different diameter

High Pressure Water Swivel

Water swivel is a kind of component, mainly used in the geological exploration. This drilling swivel is mainly comprised of high-pressure sealing ring, core tubes and spindle. This drilling water swivel