中文 中文  Anmai English English  Anmai Español Español  Anmai Русский Русский  Anmai العربية العربية

MXL-160E Crawler Anchor Drilling Equipment



Description:
 

1. This 160E crawler anchor drilling equipment belongs to full hydraulic gyrator type. Its drilling diameter is 100-250mm, and drilling depth 100-180m. The drill machine is a kind of high-efficient diesel drilling machine, mainly applied to urban subway, high-rise buildings, airport, ground source heat pump and other deep foundation pit for anchoring, jet grouting and dewatering.
2. On the basis of vertical drilling way and horizontal drilling way, the 160E crawler anchor drilling equipment can do such other ways: Spiral drilling, direct drilling, casing drilling, DTH hammer drilling, hole drilling, jet grouting drilling, reverse circulation drilling;
3. According to the different ways of assembling, the drill machine is applicable to ground source heat pump and used to drill small wells, high pressure jet grouting holes (jet), and slope reinforcement. It also can be used in large tonnage stress of construction, such as anchor hole water stations, railways, highways, drain landslide, rock collapse and prevention of geological disaster.

Advantages
1. When designing this drill machine, we take every connector of functional module into consideration.
2. If customers want to change performance, just add some modules, the drill equipment can change into high-efficient specialized drilling rig and multifunctional drilling rig. This way can improve the rate of products' utilization.
3. The 160E crawler anchor drilling equipment adopts variable hydraulic system, imported variable pump and imported proportional valve, so the drill machine has credible quality, superior performance, long operating life and good controllability.
4. Our company is the first manufacturer of domestic jumbolter and jet grouting drill mahcine. Our products are produced in batch, so the cost is cheap. In thus way, the sales price is cheap, too.
5. Our company has the first-class after-sale service group and enough engineers on line. Their rich experience can provide customers timely and high-efficient after-sale service.

Features
This 160E crawler anchor drilling equipment is stable, efficient, versatile, and able to drill complex strata and deal with accidents.
1. Controlled by full hydraulic pressure, the 160E drill machine is easy to operate and displace. Its maneuverability is strong, so it is time-saving and energy-saving.
2. The gyrator adopts double hydraulic motor drive, so the output torque is big. The center of gyration is lower than that of the similar products, greatly improving the stability of drilling hole.
3. Equipped with specialized pipe drill machine, such as drill pipe, casing, eccentric bit, the 160E crawler anchor drilling equipment is easy to use casing pipe wall to drill holes when meet with unstable strata. It is efficient and high-quality.
4. In view of the special working condition, the cooling system is optimized to ensure that the hydraulic system's outdoor temperature is 45°C, and the highest temperature should not exceed 70°C.
5. The 160E crawler anchor drilling equipment can be used for supporting deep foundation pit anchoring. And it also can be used for jet grouting by altering jet grouting module.
6. In addition to crawler chassis, holding shackle and rotary table, we will provide auxiliary accessories for our customers, such as jet grouting module, in order to be fit for your project.


Main Technique Specifications:



Basic parameter
Drilling diameter (mm) 100-250
Rotary spray pile diameter (mm)
Drilling depth (m) 100-180
Drill rod caliber/Tube diameter (mm) 89, 102, 114
Drill pipe inclination angle (°) 0-90
Gyrator parameter
Rated output speed (r/min) 20, 45, 60, 90, 120
Rated output torque (N.m) 5000
Route (mm) 3600
The route of shaft shackle slipping (mm) 1500
Lifting power (kN) 80
Lifting speed (m/min) 0-1(adjustable), 10, 20
Pressure (kN) 40
Pressure speed (m/min) 0-2(adjustable), 20, 45
Parameter of whole machine
Input power(diesel) (kW) 129(Commins)
Overall dimension of main engine
Transport state(length*width*height) (mm) 6750*2200*2500
Construction state(length*width*height) (mm) 5500*2200*6500
Weight of main engine (kg) 9800
Walking parameter
Walking pattern Crawler walking
Climbing angle (°) 15
Crawler ground bearing (kPa) 37.1
Traveling speed (km/h) 0.4
Turning parameter
Turning way Whole manual rotation
Turing structure Pivotal bearing
Location mode Locating pin
Auxiliary parts situation
Holder shackle device Standard configuration
Crawler chassis Standard configuration
Winch Standard configuration
Proportion valve Standard configuration
Plunger pump Standard configuration

Related Product

MXL-120E Crawler Anchor Drilling Rig

This 120E crawler anchor drill rig is of full hydraulic gyrator type. Its drilling diameter is 150-250mm, and drilling depth 100-140m. It is a kind of high-efficient diesel drilling equipment, mainly applied to urban subway